ARVEAN SOLVENT PRO™
PROFESSIONAL SOLVENT-BASED WATERPROOFING RUBBER
A tough, flexible and UV-resistant solvent-based waterproofing coating engineered for demanding residential, commercial, agricultural and industrial applications.
Unlike conventional water-based waterproofing coatings intended primarily for areas where water runs off, ARVEAN SOLVENT PRO can be used in suitable applications where water may gather or pond.
SOLVENT-BASEDUV RESISTANTPONDING-WATER APPLICATIONSSEAMLESS WATERPROOFINGMULTI-SURFACEPROFESSIONAL GRADE
TECHNICAL SPECIFICATIONS
KEY TECHNICAL DATA
PROPERTY
SPECIFICATION
Product type
—
Colour
—
Dry film thickness
—
Application temperature
—
Touch dry
—
Overcoat
—
Full cure
—
Coverage
—
Solid content
—
HEAVY-DUTY WATERPROOFING FOR DEMANDING CONDITIONS
ARVEAN SOLVENT PRO is a professional solvent-based waterproofing rubber coating developed to create a durable, flexible and seamless protective barrier over correctly prepared surfaces.
Its solvent-based formulation makes it particularly suitable for demanding waterproofing applications where conventional water-based coatings may not be the appropriate solution.
Once applied correctly as a complete coating system, SOLVENT PRO forms a continuous waterproof protective layer without the numerous joints and seams associated with conventional sheet-based waterproofing systems.
WHERE CAN I USE IT?
ARVEAN SOLVENT PRO forms a protective waterproof layer across a wide range of correctly prepared surfaces. Explore the applications below.
FLAT CONCRETE ROOFS & SLABS
For correctly prepared concrete surfaces requiring durable waterproof protection.
BOX GUTTERS
Ideal for waterproofing correctly prepared box gutters and other water-management areas.
IBR & CORRUGATED ROOFS
Suitable for correctly prepared metal roof structures, overlaps and problem areas.
METAL SURFACES
Suitable for compatible, correctly prepared steel and metal substrates.
WOOD
Can be applied to suitable, correctly prepared timber surfaces where the system is appropriate.
FARM DAMS & PONDS
Suitable for certain dam and pond waterproofing applications. Application suitability must be confirmed before use.
PARAPETS & ROOF DETAILS
Create seamless protection around compatible roof details and difficult waterproofing areas.
STAINLESS STEEL
Can be used on correctly prepared compatible stainless-steel surfaces.
ONE PRODUCT. MULTIPLE SURFACES. SERIOUS WATERPROOFING.
WHEN THE WATER CAN’T RUN OFF, YOU NEED THE RIGHT SYSTEM.
Many conventional water-based waterproofing coatings are designed primarily for pitched surfaces and areas where water can drain away.
ARVEAN SOLVENT PRO provides an alternative solvent-based waterproofing solution for suitable areas where water may gather or pond.
SUITABLE WHERE WATER MAY GATHER OR POND, SUCH AS:
• Flat concrete slabs
• Box gutters
• Low points on roof structures
• Selected flat-roof applications
• Water-retaining applications where technically suitable
IMPORTANT: Correct substrate preparation, detailing and application remain essential. Structural drainage problems should be corrected wherever practical rather than relying solely on a coating.
PRODUCT FEATURES
Professional performance, engineered for demanding exterior waterproofing.
SOLVENT-BASED TECHNOLOGY
Professional solvent-based waterproofing coating for demanding applications.
UV RESISTANT
Designed for exterior applications exposed to South African sunlight and weather.
PONDING-WATER CAPABLE
Suitable for correctly specified applications where water may gather.
SEAMLESS WATERPROOFING
Creates a continuous protective coating across the treated surface.
STRONG ADHESION
Designed to bond to a variety of correctly prepared compatible substrates.
FLEXIBLE PROTECTION
Forms a rubber-like protective coating capable of accommodating normal substrate movement within system limitations.
MULTI-SURFACE APPLICATION
Suitable for numerous concrete, metal and timber applications when correctly prepared.
PROFESSIONAL FINISH
Suitable for residential, commercial, agricultural and industrial waterproofing projects.
SOLVENT PRO VS WATER-BASED LIQUID RUBBER
Choosing the right system starts with understanding the difference.
ARVEAN SOLVENT PRO
• Solvent-based
• Suitable for selected ponding-water applications
• Flat slabs
• Box gutters
• Metal roofs
• Dams and ponds where technically appropriate
• Professional/heavy-duty waterproofing applications
• Brush or roller application
ARVEAN WATER-BASED LIQUID RUBBER
• Water-based
• Best suited to applications where water can drain away
• Pitched roofs
• Walls
• Parapets
• Roof tiles
• IBR and corrugated roofs
• General waterproofing applications
NOT SURE WHICH PRODUCT YOU NEED?
Contact ARVEAN and let us help you select the correct waterproofing system for your application.
AVAILABLE COLOURS
ARVEAN SOLVENT PRO is available in a range of professional finish colours.
BLACK
CHARCOAL
GREY
LIGHT GREY
DOVE GREY
WHITE
RED
TERRACOTTA
MID BLUE
GRAPHITE
GREEN
CLEAR
BURGUNDY
Digital colour representations are approximate and can vary between screens. Always confirm the final colour against an actual dry product sample before ordering where colour accuracy is important.
HOW TO APPLY
A complete two-coat waterproofing system, applied in clear steps.
STEP 1 — INSPECT THE SUBSTRATE
Identify cracks, loose coatings, rust, contamination, failed joints, holes, defective flashings and other areas requiring repair.
Do not simply coat over an existing structural or substrate failure.
STEP 2 — PREPARE THE SURFACE
The surface must be dry, sound and properly prepared. Remove dust, dirt, loose material, oil, grease, rust, flaking paint, poorly bonded coatings and other contaminants that could interfere with adhesion. Repair defects before waterproofing.
STEP 3 — DETAIL PROBLEM AREAS
Pay particular attention to cracks, roof-sheet overlaps, screws and fasteners, joints, corners, upstands, parapets, flashings, gutters and penetrations. Where required by the system specification, use compatible reinforcement such as fibreglass sheeting.
STEP 4 — FIRST COAT
ARVEAN SOLVENT PRO is supplied ready for use. Apply an even first coat using a suitable paintbrush or roller. Avoid excessively thick, uneven application and ensure complete coverage of the prepared substrate.
STEP 5 — ALLOW TO DRY COMPLETELY
Allow the first coat to dry completely before applying the next coat. Drying time will depend on temperature, humidity, airflow, substrate and application thickness. Do not trap solvent beneath subsequent coats.
STEP 6 — SECOND COAT
Apply the second complete coat evenly across the waterproofing area. Ensure complete and continuous coverage.
STEP 7 — INSPECT
Once the coating has cured sufficiently, inspect the entire waterproofing system for missed areas, pinholes, insufficient coverage or other defects and correct where required.
HOW MUCH SOLVENT PRO DO I NEED?
20 LITRES
Approximately 35–40 m² based on a two-coat application on a suitable flat surface.
WITH FIBREGLASS REINFORCEMENT:
Allow approximately 1 litre per 1 m² as a general guideline where fibreglass sheeting is incorporated.
Coverage figures are approximate only.
Actual consumption depends on: surface porosity, surface profile, application method, film thickness, weather conditions, detailing requirements, reinforcement and substrate condition.
COVERAGE ESTIMATOR:
Enter your surface area (m²) and allow roughly 0.55–0.60 L per m² for a two-coat system on a suitable flat surface. This provides an estimate only — confirm your exact requirement with ARVEAN before ordering.
AVAILABLE IN 5 L AND 20 L UNITS
ADD REINFORCEMENT WHERE THE JOB DEMANDS IT
Compatible fibreglass reinforcement may be incorporated into selected ARVEAN SOLVENT PRO waterproofing systems for difficult areas and applications requiring additional reinforcement.
TOP COAT
↓
ARVEAN SOLVENT PRO
↓
FIBREGLASS REINFORCEMENT
↓
ARVEAN SOLVENT PRO
↓
PREPARED SUBSTRATE
Contact ARVEAN for project-specific system recommendations before using reinforcement.
IMPORTANT TECHNICAL INFORMATION
IMPORTANT:
ARVEAN SOLVENT PRO IS A WATERPROOFING COATING. It is NOT intended as a general-purpose floor or high-traffic floor coating.
For garages, workshops, warehouses, factories, showrooms and other trafficable floor applications, use an ARVEAN dedicated floor coating / polyurethane floor system instead.
• Do not apply to wet or contaminated substrates.
• Do not apply over loose or poorly bonded coatings.
• Confirm compatibility before coating unusual substrates.
• Do not apply directly to glass.
• Do not use for applications outside the published ARVEAN specification without technical approval.
• Correct structural defects and drainage issues where necessary before waterproofing.
TOOLS & SAFETY
APPLICATION TOOLS
• Suitable paintbrush
• Suitable roller
• Mixing tool if required
• Scraper
• Wire brush / preparation tools
• Appropriate reinforcement where specified
• Compatible quick-drying/lacquer thinner where technically required
PERSONAL PROTECTIVE EQUIPMENT
• Chemical-resistant gloves
• Eye protection
• Suitable respiratory protection
• Protective clothing
• Protective footwear
SOLVENT-BASED PRODUCT — USE WITH ADEQUATE VENTILATION. Keep away from ignition sources and follow all applicable product label and Safety Data Sheet requirements.
CLEANING EQUIPMENT
AFTER APPLICATION
Clean compatible brushes and rollers with the recommended thinner before the product cures. Do not dispose of solvent-based coating or cleaning solvent into drains, soil or waterways. Follow local regulations for disposal of solvent-containing materials.
PROFESSIONAL WATERPROOFING STARTS WITH THE CORRECT SYSTEM.
Product performance depends on correct substrate assessment, preparation, detailing, product consumption, application and curing. Where a project-specific ARVEAN guarantee or warranty is available, the applicable terms and conditions must be confirmed before installation. Contact ARVEAN for information regarding approved systems and warranty requirements.
DO IT YOURSELF OR GET PROFESSIONAL ADVICE
For straightforward applications, experienced DIY customers may be able to apply ARVEAN SOLVENT PRO by following the applicable preparation and application instructions. For larger, complex, commercial or high-risk waterproofing projects, professional assessment and application are recommended.
COMMON PROBLEMS SOLVENT PRO CAN HELP ADDRESS
Select your situation to find the right next step toward a durable waterproofing solution.
FREQUENTLY ASKED QUESTIONS
Q: What is solvent-based liquid rubber?
A: It is a solvent-based protective coating that forms a flexible, seamless waterproofing layer over compatible, correctly prepared substrates.
Q: Can ARVEAN SOLVENT PRO handle standing water?
A: It is suitable for selected waterproofing applications where water may gather or pond, provided the substrate and application are suitable and the complete system is installed correctly.
Q: Can I use it on a flat concrete roof?
A: Yes, on suitable, sound and correctly prepared concrete substrates.
Q: Can it be applied to IBR roofing?
A: Yes, provided the metal substrate is compatible and correctly prepared before application.
Q: Can I use it on wood?
A: It can be used on suitable, correctly prepared timber substrates. Confirm the system for unusual or demanding applications.
Q: Can I use it on floors?
A: It is not recommended as a general floor or high-traffic coating. Use an ARVEAN dedicated floor coating system instead.
Q: How many coats are required?
A: A minimum two-coat system should be used unless a project-specific ARVEAN specification states otherwise.
Q: How much does 20 L cover?
A: As a general guideline, approximately 35–40 m² for a two-coat application on a suitable flat surface. Actual coverage varies according to substrate and application conditions.
Q: Can I use fibreglass reinforcement?
A: Yes, compatible fibreglass reinforcement can be incorporated into suitable applications. Consumption increases substantially when reinforcement is used.
Q: Do I need to dilute it?
A: The product is supplied ready for use and should normally be applied without dilution. Only use an approved compatible thinner when technically necessary and in accordance with ARVEAN instructions.
Q: Can it be used on glass?
A: No. Do not specify ARVEAN SOLVENT PRO for direct application to glass.
STOP PATCHING THE LEAK.
BUILD A WATERPROOFING SYSTEM.
From residential roofs and box gutters to commercial slabs, agricultural applications and demanding waterproofing projects, ARVEAN can help you select the right system for the job.
NATIONWIDE PRODUCT SUPPLY
RESIDENTIAL | COMMERCIAL | INDUSTRIAL | AGRICULTURAL